core veneer roller dryer machine       

• core veneer peeling production line
  • spindleless wood log debarking machine
  • spindleless veneer peeling machine
  • veneer stacker
  • 4ft veneer peeling machine line
  • 8ft veneer peeling machine line
• face veneer peeling machine line
  • spindle wood log debarker
  • spindle veneer peeling machine
  • veneer clipper
  • veneer stacker
  • spindle veneer peeling machine production line
• thick veneer peeling machine
• kinfe grinding machine
• veneer composer
• veneer paving machine
• plywood cold press machine
• plywood hot press machine
  • ordinary plywood hot press macihne
  • film face lamination hot press machine
  • melamine paper lamination hot press machine
• short cycle lamination hot press machine
• plywood end cutting saw
• glue mixer glue spreader machine
  • glue mixer
  • 4ft glue spreader
  • 8ft glue spreader
• veneer dryer machine
  • core veneer roller dryer machine
  • face veneer mesh dryer machine
  • face veneer wire dryer machine
  • core veneer hot press type veneer dryer machine
• automatic mat board putty machine
• sanding machine
  • automatic sanding machine line
  • sanding machine
• boiler
• other accessory equipment
  • lift table
  • overturning machine
  • Core edge grinder machine
  • Veneer press joint machine

 core veneer roller dryer machine is used to remove Excessive moisture, the fresh core veneers moisture percent is about 60-80%, then we will use dryer machine to dry, then the final moisture percent is about 8-12%.the machine specifciation is not fixed,it need to be customized according to client's requirement.like the moisture of the veneer,the veneer thickness, the veneer size , the capacity per day.... these influence the machine specification.
so if you know the below data,please kindly tell us before you purchasing roller type dryer machine:
1,mositure of the veneer
2,veneer length,veneer width and veneer thickness
3,how much capacity veneer will be dryed per day
4,the working time per day

specifcaition (this specification only is as reference)

Effective working width:2800mm
Working deck:1
Length of heating sections:10*3000=30000mm
Length of cooling sections:1*3000=3000mm
Total installed power :90kw
For transportation :11kw*1=11kw
For heating:7.5kw*10=75kw
For cooling :4kw*1=4kw
Feed speed:1-30m/min
Drying method:Hot air,steam or Thermal oil
Veneer thickness:1-6mm
Initinal moisture content:60%
Veneer moisture after veneer dryer :<12%
Dry capacity:1.2-1.6m3/hr
staff:2
Dimension :33000*4400*2300mm
Total weight :34T

plywood edge cutting machine working video:

If you want more details,please feel free to contact us:

MOBILE:+8615064931296
WHAT'S APP:008615064931296
WECHAT:15064931296
SKYPE:skype2014102
EMAIL: jacky@geelonggroup.com
WEB: www.geelongmachinery.com
www.geelonggroup.com
Alibaba Gold Supplier:
Http://lygeelong.en.alibaba.com